Release : 1.1f 374 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
Multiple Instance:
SMIS# show vlan device info
Switch default
Vlan device configurations
--------------------------
Vlan Status : Enabled
Vlan Oper status : Enabled
Gvrp status : Enabled
Gmrp status : Disabled
Gvrp Oper status : Enabled
Gmrp Oper status : Disabled
Mac-Vlan Status : Disabled
Protocol-Vlan Status : Enabled
Bridge Mode
: Provider Edge
Bridge
Traffic Classes : Enabled
Vlan Operational Learning Mode
: IVL
Version number : 1
Max Vlan id : 4069
Max supported vlans : 1024
Related Commands
shutdown vlan - Shuts down VLAN switching. The no form of the command starts and
enables
VLAN switching
set vlan - Enables/disables VLAN in the switch
vlan - Configures a VLAN in the switch and is also used to enter in to the config-VLAN mode
ports - Configures a static VLAN entry with the required member ports, untagged ports and
forbidden ports
set gvrp - Enables or disables GVRP on a global basis
set port gvrp - Enables or disables GVRP on the interface
To Next Page
Loading...
