Release : 1.1f 398 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
If executed without the optional parameters this command displays the MAC address
table of all the available interfaces
Related Commands
vlan - Configures a VLAN in the switch and is also used to enter in to the config-VLAN mode
ports - Configures a static VLAN entry with the required member ports, untagged ports and
forbidden ports
mac-address-table static unicast - Configures a static unicast MAC address in the
forwarding database
show mac-address-table static unicast - Displays the statically configured unicast
address from the MAC address table
To Next Page
Loading...
