Release : 1.1f 913 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
Protocol type with the value 255 indicates that protocol can be anything and it will not be checked
against the action to be performed.
Related Commands
ip access-list - Creates IP ACLs and enters the IP Access-list configuration mode
show access-lists - Displays the access list configuration
deny - ip/ospf/pim/protocol type- Denies traffic for a particular protocol packet if the
conditions defined in the deny statement are matched
redirect - ip/ospf/pim/protocol type- Redirects traffic for a particular protocol packet
if the conditions defined in the redirect statement are matched
To Next Page
Loading...
