Release : 1.1f 929 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
Priority - The priority of the filter used to decide which filter rule is applicable when the packet
matches with more than one filter rules. Higher value of 'filter priority' implies a higher
priority.
Mode
ACL Extended Access List Configuration Mode
Example
SMIS(config-ext-nacl)# redirect gi 0/1 udp host 10.0.0.1 any eq 20
Related Commands
ip access-list - Creates IP ACLs and enters the IP Access-list configuration mode
show access-lists - Displays the access list configuration
permit udp - Specifies the UDP packets to be forwarded based on the associated parameters
deny udp - Specifies the UDP packets to be denied based on the associated parameters
To Next Page
Loading...
