Release : 1.1f 931 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
11 Time exceeded
12 Parameter problem
13 Timestamp request
14 Timestamp reply
15 Information request
16 Information reply
17 Address mask request
18 Address mask reply
155 No ICMP type
The ICMP code can be any of the following:
- Value ICMP code
- 0 Network unreachable
- 1 Host unreachable
- 2 Protocol unreachable
- 3 Port unreachable
- 4 Fragment need
- 5 Source route fail
- 6 Destination network unknown
- 7 Destination host unknown
- 8 Source host isolated
- 9 Destination network administratively prohibited
- 10 Destination host administratively prohibited
- 11 Network unreachable TOS
- 12 Host unreachable TOS
- 255 No ICMP code
Related Commands
ip access-list - Created IP ACLs and enters the IP Access-list configuration mode
show access-lists - Displays the access list configuration
deny icmp - Specifies the ICMP packets to be rejected based on the IP address and
associated parameters
redirect icmp - Specifies the ICMP packets to be redirected based on the IP address and
associated parameters
To Next Page
Loading...
