Release : 1.1f 935 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
The ICMP message type can be one of the following:
Value ICMP type
0 Echo reply
3 Destination unreachable
4 Source quench
5 Redirect
8 Echo request
11 Time exceeded
12 Parameter problem
13 Timestamp request
14 Timestamp reply
15 Information request
16 Information reply
17 Address mask request
18 Address mask reply
155 No ICMP type
The ICMP code can be any of the following:
Value ICMP code
0 Network unreachable
1 Host unreachable
2 Protocol unreachable
3 Port unreachable
4 Fragment need
5 Source route fail
6 Destination network unknown
7 Destination host unknown
8 Source host isolated
9 Destination network administratively prohibited
10 Destination host administratively prohibited
11 Network unreachable TOS
12 Host unreachable TOS
255 No ICMP code
Related Commands
ip access-list - Creates IP ACLs and enters the IP Access-list configuration mode
show access-lists - Displays the access list configuration
To Next Page
Loading...
