Microsemi SmartFusion2 - Table 385 RPKT; Table 387 RMCA

Ethernet MAC
UG0331 User Guide Revision 15.0 418
Table 385 • RPKT
Bit Number Name Reset Value Description
[31:18] Reserved 0x0 Reserved
[17:0] RPKT 0x0 Receive packet counter: Incremented for each frame received
packet (including bad packets, all the unicast, broadcast, and
multicast packets).
Table 386 • RFCS
Bit Number Name Reset Value Description
[31:12] Reserved 0x0 Reserved
[11:0] RFCS 0x0 Receive FCS error counter: Incremented for each frame received
that has an integral 64 to 1518 length and contains a FCS error.
Table 387 • RMCA
Bit Number Name Reset Value Description
[31:18] Reserved 0x0 Reserved
[17:0] RMAC 0x0 Receive multicast packet counter: Incremented for each multicast
good frame of lengths smaller than 1518 (non VLAN) or 1522
(VLAN) excluding the broadcast frames. This does not include
range, length errors.
Table 388 • RBCA
Bit Number Name Reset Value Description
[31:22] Reserved 0x0 Reserved
[21:0] RBCA 0x0 Receive broadcast packet counter: Incremented for each
Broadcast good frame of lengths smaller than 1518 (non VLAN) or
1522 (VLAN) excluding the multicast frames. This does not look at
range/length errors.
Table 389 • RXCF
Bit Number Name Reset Value Description
[31:18] Reserved 0x0 Reserved
[17:0] RXCF 0x0 Receive control frame packet counter: Incremented for each MAC
control frame received (PAUSE and Unsupported).
Table 390 • RXPF
Bit Number Name Reset Value Description
[31:12] Reserved 0x0 Reserved
[11:0] RXPF 0x0 Receive PAUSE frame packet counter: Incremented each time a
valid PAUSE MAC control frame is received.