Microsemi SmartFusion2 - Table 770 Bit-Band Register Bit of INTERRUPT_REASON0 and INTERRUPT_REASON1

Fabric Interface Interrupt Controller
UG0331 User Guide Revision 15.0 747
The following table gives the bit-band register bit of INTERRUPT_REASON0 and
INTERRUPT_REASON1 in the INTERRUPT_CTRL structure. Refer to m2sxxx.h contained in the
CMSIS folder.
Table 770 • Bit-Band Register Bit of INTERRUPT_REASON0 and INTERRUPT_REASON1.
Bit-Band Register Bit
INTERRUPT_REASON0 INTERRUPT_REASON1
SPIINT0_STATUS RESERVED5[3]
SPIINT1_STATUS MDDR_IO_CALIB_INT_STATUS
I2C_INT0_STATUS RESERVED6
I2C_INT1_STATUS FAB_PLL_LOCK_INT_STATUS
MMUART0_INTR_STATUS FAB_PLL_LOCKLOST_INT_STATUS
MMUART1_INTR_STATUS FIC64_INT_STATUS
MAC_INT_STATUS RESERVED7[24]
USB_MC_INT_STATUS
PDMAINTERRUPT_STATUS
HPD_XFR_CMP_INT_STATUS
TIMER1_INTR_STATUS
TIMER2_INTR_STATUS
CAN_INTR_STATUS
RTC_WAKEUP_INTR_STATUS
WDOGWAKEUPINT_STATUS
MSSDDR_PLL_LOCKLOST_INT_STATUS
ENVM_INT0_STATUS
ENVM_INT1_STATUS
I2C_SMBALERT0_STATUS
I2C_SMBSUS0_STATUS
I2C_SMBALERT1_STATUS
I2C_SMBSUS1_STATUS
HPD_XFR_ERR_INT_STATUS
MSSDDR_PLL_LOCK_INT_STATUS
SW_ERRORINTERRUPT_STATUS
DDRB_INTR_STATUS
ECCINTR_STATUS
CACHE_ERRINTR_STATUS
SOFTINTERRUPT_STATUS
COMBLK_INTR_STATUS
USB_DMA_INT_STATUS
RESERVED4