Fabric Interface Interrupt Controller
UG0331 User Guide Revision 15.0 751
15 MSSDDR_PLL_LOCKLOST_INT
_ENBL
0 MSSDDR_PLL_LOCKLOST_INT interrupt from MPLL to
the fabric.
1: Enable
0: Mask
16 ENVM_INT0_ENBL 0 ENVM_INT0 interrupt from the MSS ENVM0 block to
fabric.
1: Enable
0: Mask
17 ENVM_INT1_ENBL 0 ENVM_INT1 interrupt from MSS ENVM1 block to fabric.
1: Enable
0: Mask
18 I2C_SMBALERT0_ENBL 0 I2C_SMBALERT0 interrupt from MSS I2C_0 block to
fabric.
1: Enable
0: Mask
19 I2C_SMBSUS0_ENBL 0 I2C_SMBSUS0 interrupt from the MSS I2C_0 block to
fabric.
1: Enable
0: Mask
20 I2C_SMBALERT1_ENBL 0 I2C_SMBALERT1 interrupt from the MSS I2C_1 block to
fabric.
1: Enable
0: Mask
21 I2C_SMBSUS1_ENBL 0 I2C_SMBSUS1 interrupt from the MSS I2C_1 block to
fabric.
1: Enable
0: Mask
22 HPD_XFR_ERR_INT_ENBL 0 HPD_XFR_ERR_INT interrupt from the MSS HPDMA
block to fabric.
1: Enable
0: Mask
23 MSSDDR_PLL_LOCK_INT_ENBL 0 MSSDDR_PLL_LOCK_INT interrupt from the MPLL
block to fabric.
1: Enable
0: Mask
Table 772 • INTERRUPT_ENABLE0 (continued)
Bit
Number
Name
Reset
Value
Description
To Next Page
Loading...
