Keysight x-series User Manual

3 Spectrum Analyzer Mode
3.6 Power Stat CCDF Measurement
n Results Returned
# Item Unit, if
any
8 Power level that has 0.0001% of the power
9 Peak power dB
10 Count
11 Power level that has 0.00001% of the power if "Minimum Probability" on
page 1138 is PP7 (0.00001 %)
This value is returned only when PP7 is selected
2 Returns a series of 5001 floating point numbers (in percent) that represent the current measured power
stat trace. This is the probability at particular power levels (average power), in the following order:
1. Probability at 0.0 dB power
2. Probability at 0.01 dB power
3. Probability at 0.02 dB power
…
5000. Probability at 49.9 dB power
5001. Probability at 50.0 dB power
3 Returns a series of 5001 floating point numbers (in percent) that represent the Gaussian trace. This is the
probability at particular power levels (average power), in the following order:
1. Probability at 0.0 dB power
2. Probability at 0.01 dB power
3. Probability at 0.02 dB power
…
5000. Probability at 49.9 dB power
5001. Probability at 50.0 dB power
4 Returns a series of 5001 floating point numbers (in percent) that represent the user-definable reference
trace. This is the probability at particular power levels (average power), in the following order:
1. Probability at 0.0 dB power
2. Probability at 0.01 dB power
3. Probability at 0.02 dB power
…
5000. Probability at 49.9 dB power
5001. Probability at 50.0 dB power
3.6.1 Views
In the LTEATDD and 5GNR Modes, this measurement has two views: "Normal" on
page 1134 and Slot. In all other Modes, there is only a single view (Normal).
Spectrum Analyzer Mode User's &Programmer's Reference 1133

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)