Keysight x-series User Manual

8 Trigger
8.1 Trigger
8.1.14 Field
Selects the Field on which to trigger:
Entire
Frame
ENTire
Causes the selected line number to be viewed as an offset into the
entire frame starting with line 1, the first line in Field One
Field One
ODD
Causes the selected line number to be viewed as an offset into the first
field starting with Line 1, the first line in Field One
Field Two
EVEN
Causes the selected line number to be viewed as an offset into the
second field. If Line 1 is selected, it is the 264th line of the frame
(NTSC-M, NTSC-Japan, NTSC-4.43, PAL-M, PAL-60) or the 314th line
of the frame (PAL-B,D,G,H,I, PAL-N, PAL-N-Combin, SECAM-L)
Remote Command
:TRIGger[:SEQuence]:TV:FMODe ENTire | ODD | EVEN
:TRIGger[:SEQuence]:TV:FMODe?
Example
:TRIG:TV:FMOD ENT
:TRIG:TV:FMOD EVEN
:TRIG:TV:FMOD ODD
Dependencies Only available in the Swept SA measurement
Only appears when TV is selected as the Trigger Source
This command is available only when Option B7B (TV trigger) is installed
Preset
ENTire
Range
ENTire|ODD|EVEN
8.1.15 Standard
Accesses the Standard menu keys, which select from the following TV standards:
NTSC-M
MNTSc
NTSC-Japan
JNTSc
NTSC-4.43
NTSC443
PAL-M
MPAL
PAL-B,D,G,H,I
BPAL
PAL-N
NPAL
PAL-N-Combin
CPAL
PAL-60
PAL60
SECAM-L
LSEC
As the TV standard is changed, the current line value is clipped as necessary to keep
it valid for the chosen standard and field mode. For example, line 600 is selected in
2675 Spectrum Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)