Keysight x-series User Manual

8 Trigger
Controls the Trigger system of the instrument. In general, these are functions
associated with internal triggers or trigger inputs. Trigger Output functions are
configured under Input/Output.
Trigger functions are common across multiple Modes and Measurements, although
some controls appear only in certain Modes and/or certain Measurements.
Additionally, some of the tabs on the Trigger menu are only available in certain
Modes.
Many of the Trigger functions can be set graphically using the Trigger Setting
Diagram. For more information see: "Trigger Optimization" on page 2680
In general, each Measurement can have a different Trigger, and each Measurement
remembers its previous-trigger setting.
X-Series Signal Analyzers
Spectrum Analyzer Mode User's &Programmer's Reference
2632

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)