4 System
4.11 SCPI Recorder
4.11.5 Copy
Copies the SCPI column data to the system clipboard, to make it available for Paste
operations.
4.11.6 Insert *OPC? Below
Certain queries and commands must be sent during instrument programming, but
there is no corresponding user-interface control for these commands. This control
allows you to insert one such query: *OPC? below the selected row.
4.11.7 Move Up
Moves the selected / highlighted row up by 1 slot. Note that moving a mode or
measurement switch entry in the table may impact context for subsequent entries in
the table.
4.11.8 Move Down
Moves the selected / highlighted row down by 1 slot. Note that moving a mode or
measurement switch entry in the table may impact context for subsequent entries in
the table.
4.11.9 Delete Row
Deletes the selected entry from the recording table. Note that some entries may
have subsequent entries related to the row that you delete, for example, *OPC?,
which may be added automatically after a mode or measurement switch.
4.11.10 Delete All
Deletes all entries from the recording table. A warning message is displayed: “All
recording data will be deleted”.
To confirm that you want to delete the entire recording content, click OK, or click
Cancel to avoid deleting it.
2195 Spectrum Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
Need help?
General
