Keysight x-series - 5.13 Preset Type (Remote Command Only)

5 Preset
5.13 Preset Type (Remote Command Only)
5.13 Preset Type (Remote Command Only)
Remote
Command
:SYSTem:PRESet:TYPE FACTory | MODE | USER
:SYSTem:PRESet:TYPE?
Example
:SYST:PRES:TYPE FACT
Notes Supported for backwards compatibility only. It is a no-op, which does not change the behavior of any
preset operation
Preset Unaffected by Preset, but set to MODE by Restore System Defaults->All
State Saved No
2220 Spectrum Analyzer Mode User's &Programmer's Reference