Keysight x-series User Manual

2 User Interface
2.1 Screen Tabs
GSM Mode compatibility command (Remote Command only)
Provided for backwards compatibility. When this command is received, the analyzer
aliases it to the following:
:INST:SEL EDGEGSM
Remote Command
:INSTrument[:SELect] GSM
Example
:INST GSM
SA compatibility command for EMC (Remote Command only)
Provided for ESU compatibility. When this command is received, the analyzer
aliases it to the following:
:INST:SEL SCPILC
This results in the analyzer being placed in SCPI Language Compatibility Mode, in
order to emulate the ESU Spectrum Analyzer Mode.
Remote Command
:INSTrument[:SELect] SANalyzer
Example
:INST SAN
Receiver compatibility command for EMC (Remote Command only)
Provided for ESU compatibility. When this command is received, the instrument
aliases it to the following:
:INST:SEL EMI
:CONF FSC
This results in the instrument being placed in the EMI Receiver Mode, running the
Frequency Scan measurement, in order to emulate the ESU Receiver Mode.
Remote Command
:INSTrument[:SELect] RECeiver
Example
:INST REC
APD compatibility command for EMC(Remote Command only)
Provided for ESU compatibility. When this command is received, the analyzer
aliases it to the following:
:INST:SEL EMI
:CONF APD
Spectrum Analyzer Mode User's &Programmer's Reference 96

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)