Keysight x-series User Manual

9 Programming the Instrument
9.1 List of Supported SCPI Commands
FORMat[:TRACe][:DATA]
H
HCOPy:ABORt
HCOPy[:IMMediate]
I
INITiate:<measurement>
INITiate:ACPower
INITiate:CHPower
INITiate:CONTinuous
INITiate:HARMonics
INITiate[:IMMediate]
INITiate:LIST
INITiate:OBWidth
INITiate:PAUSe
INITiate:PAVTime
INITiate:PSTatistic
INITiate:RESTart
INITiate:RESume
INITiate:SANalyzer
INITiate:SEMask
INITiate:SPURious
INITiate:TOI
INITiate:TXPower|BPOWer
INPut[1]:IQ[:I]:IMPedance
INPut[1]:IQ:Q:IMPedance
INPut:COUPling
INPut:COUPling:I
INPut:COUPling:Q
INPut:FEXTender:CABLe:CORRection
INPut:IMPedance:REFerence
INPut:IQ[:I]:DIFFerential
INPut:IQ:MIRRored
INPut:IQ:Q:DIFFerential
INPut:OFFSet:I
INPut:OFFSet:Q
INSTrument:CATalog?
INSTrument:CONFigure:<mode_id>:<meas>
INSTrument:COUPle:DEFault
INSTrument:COUPle:EMC:STANdard
INSTrument:COUPle:FREQuency:BAND:EXTend
INSTrument:COUPle:FREQuency:CENTer
INSTrument:COUPle:LLINe
INSTrument:COUPle:SCReen:INPut
INSTrument:DEFault
2717 Spectrum Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)