3 Spectrum Analyzer Mode
3.9 SEM Measurement
Diagrams for MSR, LTEAFDD/LTEATDD, 5G NR
Offset Detector
Enables you to control the detector for offsets. The following choices are available:
AUTO
The detector selected depends on marker functions, trace functions, average
type, and the trace averaging function
NORMal
The detector determines the peak of the CW-like signals, and it yields alternating
maximums and minimums of noise-like signals. This is also referred to as
Rosenfell detection
AVERage
The detector determines the average of the signal within the sweep points. The
Spectrum Analyzer Mode User's &Programmer's Reference 1629
To Next Page
Loading...
