Keysight x-series User Manual

3 Spectrum Analyzer Mode
3.7 Burst Power Measurement
In any menu tab that displays Select Marker, the first control is always Marker
Frequency|Time.
Notes The selected marker is remembered even when not in the Marker menu and is used if a Search is
performed, or a Band Function is turned on, or for Signal Track or Continuous Peak
Preset Marker 1
State Saved The number of the selected marker is saved in instrument state
Annunciation Appears in the marker results block label for Normal and Delta markers
3.7.7.2 Settings
The controls on this tab include the Marker active function and a radio button
selection of the marker control mode (Normal, Delta, or Off) for the selected marker,
as well as additional functions that help you use markers.
Marker Time
Sets the Marker Time in the current marker X-Axis Scale unit. It has no effect if the
control mode is Off, but is the SCPI equivalent of entering an X value if the control
mode is Normal or Delta.
Remote
Command
:CALCulate:TXPower:MARKer[1]|2|...|12:X <real>
:CALCulate:TXPower:MARKer[1]|2|...|12:X?
Example
:CALC:TXP:MARK3:X 0
:CALC:TXP:MARK3:X?
Notes If no suffix is sent, uses the fundamental units for the current marker X-Axis Scale. If a suffix is sent that
does not match the current marker X-Axis Scale unit, an error “Invalid suffix” is generated
The query returns the marker’s absolute X-Axis value if the control mode is Normal, or the offset from
the marker’s reference marker if the control mode is Delta. The query is returned in the fundamental
units for the current marker X Axis scale: Hz for Frequency and Inverse Time, seconds for Period and
Time. If the marker is Off the response is Not A Number (NAN)
Couplings Max value would be changed by Sweep Time parameter value
Preset After a preset, all Markers are turned OFF, so a Marker X Axis Value query will return Not A Number
(NAN)
State Saved No
Min -9.9E+37
Max 9.9E+37
Annotation Mkr # <X value> and <Marker value> upper right on graph
Backwards
Compatibility
SCPI
:CALCulate:BPOWer:MARKer[1]|2|...|12:X
Included for backwards compatibility. Not recommended for use in new designs
1310 Spectrum Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)