Keysight x-series User Manual

7 Save/Recall/Print
7.3 Save
Result Type Spectrogram
6000009390 -78.82602188
6000009415 -76.37486709
DATA10 0
5999984415 -75.56751112
5999984440 -75.76485645
5999984465 -76.67718717
5999984490 -78.79238489
5999984515 -83.72680212
…
6000009315 -71.3942461
6000009340 -72.28308332
6000009365 -73.92684489
6000009390 -75.45548832
6000009415 -75.17904815
Meas Results
Meas Results files contain information that describes the current state of the
instrument, as detailed in Meas Result File Contents below.
This command is only available in certain measurements, such as:
–
PowerSuite: Channel Power, OBW, ACP, Spectrum Emissions Mask, Spurious
Emissions, Power Stat CCDF, Transmit Power, Monitor Spectrum, IQ Waveform
–
IQ Analyzer: Complex Spectrum
–
Phase Noise: Log Plot and Spot Frequency
–
WCDMA: Code Domain, Mod Accuracy, Power Control, and QPSK EVM
–
Analog Demod: AM, FM, PM and FM Stereo
–
Noise Figure
–
Pulse
In general, the data in the Meas Results file matches the data which is returned to a
measurement data query (:FETCh?, :READ?, :MEASure?). These queries and the
results they return are documented for each measurement, and can be found in the
Help for that measurement (or in the manual for that measurement) in the section
titled Remote Command Results.
2581 Spectrum Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)