Keysight x-series User Manual

6 Input/Output
6.1 RF Source
:SOUR:LIST:STEP2:SET:TRAN:TIME?
Notes SCPI is supported after A.09.40
Dependencies Not available in E7760B
Preset 1.0 ms
Min 0.0 ms
Max 4.0 ks
Band
Lets you select the radio band for use in the current step.
Remote Command
:SOURce:LIST:STEP[1]|2|…|1000:SETup:RADio:BAND <band>
where <band> is one of:
NONE | PGSM | EGSM | RGSM | DCS1800 | PCS1900 | GSM450 | GSM480 | GSM700 |
GSM850 | TGSM810 | USCELL | USPCS | JAPAN | KOREAN | NMT | IMT2K | UPPER |
SECOND | PAMR400 | PAMR800 | IMTEXT | PCS1DOT9G | AWS | US2DOT5G | PUBLIC |
LOWER | BANDI | BANDII | BANDIII | BANDIV | BANDV | BANDVI | BANDVII |
BANDVIII | BANDIX | BANDX | BANDXI | BANDXII | BANDXIII | BANDXIV | BANDXIX
| BAND1 | BAND2 | BAND3 | BAND4 | BAND5 | BAND6 | BAND7 | BAND8 | BAND9 |
BAND10 | BAND11 | BAND12 | BAND13 | BAND14 | BAND17 | BAND18 | BAND19 |
BAND20 | BAND21 | BAND24 | BAND25 | BAND26 | BAND27 | BAND28 | BAND29 |
BAND30 | BAND31 | BAND65 | BAND66 | BAND67 | BAND68 | BAND71 | BAND252 |
BAND255 | BAND33 | BAND34 | BAND35 | BAND36 | BAND37 | BAND38 | BAND39 |
BAND40 | BAND41 | BAND42 | BAND43 | BAND44 | BAND45 | BAND46 | BANDA | BANDB
| BANDC | BANDD | BANDE | BANDF | N1 | N2 | N3 | N5 | N7 | N8 | N12 | N20 |
N25 | N28 | N34 | N38 | N39 | N40 | N41 | N50 | N51 | N66 | N70 | N71 | N74
| N75 | N76 | N77 | N78 | N79 | N80 | N81 | N82 | N83 | N84 | N86 | N257 |
N258 | N260 | N261
:SOURce:LIST:STEP[1]|2|…|1000:SETup:RADio:BAND?
Example
:SOUR:LIST:STEP2:SET:RAD:BAND PGSM
:SOUR:LIST:STEP2:SET:RAD:BAND?
Notes SCPI is supported after A.09.40
Dependencies Not available in E7760B
Here are the Radio Standards for each Band, and a SCPI example for each (Step 2 is
assumed):
Band Standard SCPI Example
None None
:SOUR:LIST:STEP2:SET:RAD:BAND NONE
P-GSM GSM/EDGE
:SOUR:LIST:STEP2:SET:RAD:BAND PGSM
E-GSM GSM/EDGE
:SOUR:LIST:STEP2:SET:RAD:BAND EGSM
R-GSM GSM/EDGE
:SOUR:LIST:STEP2:SET:RAD:BAND RGSM
DCS 1800 GSM/EDGE
:SOUR:LIST:STEP2:SET:RAD:BAND DCS1800
2242 Spectrum Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)