Keysight x-series User Manual

5 Preset
5.12 Restore Screen Defaults
5.12 Restore Screen Defaults
Resets the Screen configuration to the factory default; deleting all screens, all
screen names, all screen states, and setting "Multiscreen" on page 176 to Off. A
single screen will remain, set to the Power-on Mode, in a preset state with the
default screen name.
Restore Screen Defaults can be executed from the "Preset Dropdown" on page
2206.
When Restore Screen Defaults is selected, a message appears saying:
This function will delete all defined screens and their settings. This action
cannot be undone.
Do you want to proceed?
The message provides OK and Cancel buttons.
Example
:SYST:DEF SCReen
Spectrum Analyzer Mode User's &Programmer's Reference 2219

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)