Keysight x-series User Manual

3 Spectrum Analyzer Mode
3.12 List Sweep Measurement (Remote Only)
Preset Current electronic attenuation value from Swept SA measurement
State Saved Saved in instrument state
Range Same as the electronic attenuator range.
Remote
Command
[:SENSe]:LIST:EATTenuation:POINts?
Example
LIST:EATT:POIN?
3.12.3.4 RBW Type List
This command defines a list of analyzer RBW Type settings used for the
measurements.
The query form queries the analyzer for the values in the RBW Type list.
Remote
Command
[:SENSe]:LIST:BANDwidth|BWIDth:RESolution:TYPE <type>[, <type>]
[:SENSe]:LIST:BANDwidth|BWIDth:RESolution:TYPE?
Example
LIST:BAND:RES:TYPE GAUS
For this example, Types from Swept SA measurement include: GAUSsian|FLATtop|EMI
Preset Current RBW Type setting from Swept SA measurement
State Saved Saved in instrument state
Range Same as the RBW Types available in Swept SA measurement.
Remote
Command
[:SENSe]:LIST:BANDwidth|BWIDth:RESolution:TYPE:POINts?
Example
LIST:BAND:RES:TYPE:POIN?
3.12.3.5 RBW List
This command defines a list of analyzer RBW settings at which the measurements
are made.
The query form queries the analyzer for the values in the RBW list.
Remote
Command
[:SENSe]:LIST:BANDwidth|BWIDth:RESolution <freq>[, <freq>]
[:SENSe]:LIST:BANDwidth|BWIDth:RESolution?
Example
LIST:BAND:RES 100KHZ
Preset Current RBW value from Swept SA measurement
1938 Spectrum Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)