Keysight x-series User Manual

3 Spectrum Analyzer Mode
3.8 Spurious Emissions Measurement
| NEGative | NORMal | POSitive | SAMPle | RMS, AVERage | NEGative | NORMal |
POSitive | SAMPle | RMS, AVERage | NEGative | NORMal | POSitive | SAMPle |
RMS, AVERage | NEGative | NORMal | POSitive | SAMPle | RMS, AVERage |
NEGative | NORMal | POSitive | SAMPle | RMS, AVERage | NEGative | NORMal |
POSitive | SAMPle | RMS, AVERage | NEGative | NORMal | POSitive | SAMPle |
RMS, AVERage | NEGative | NORMal | POSitive | SAMPle | RMS, AVERage |
NEGative | NORMal | POSitive | SAMPle | RMS, AVERage | NEGative | NORMal |
POSitive | SAMPle | RMS, AVERage | NEGative | NORMal | POSitive | SAMPle |
RMS, AVERage | NEGative | NORMal | POSitive | SAMPle | RMS, AVERage |
NEGative | NORMal | POSitive | SAMPle | RMS, AVERage | NEGative | NORMal |
POSitive | SAMPle | RMS, AVERage | NEGative | NORMal | POSitive | SAMPle |
RMS, AVERage | NEGative | NORMal | POSitive | SAMPle | RMS, AVERage |
NEGative | NORMal | POSitive | SAMPle | RMS
[:SENSe]:SPURious[:RANGe][:LIST]:DETector[1][:FUNCtion]?
Example
:SPUR:DET NORM, NORM, NORM, NORM, NORM, NORM, NORM, NORM, NORM, NORM, NORM,
NORM, NORM, NORM, NORM, NORM, NORM, NORM, NORM, NORM
:SPUR:DET?
Notes For backwards compatibility, NORMal is available as a command parameter. However, this is treated
the same as RMS internally, so the query never returns NORMal
Preset
POS, POS, POS, POS, POS, POS, POS, POS, POS, POS, POS, POS, POS, POS, POS,
POS, POS, POS, POS, POS
State Saved Saved in instrument state
Range Normal | Average | Peak | Sample | Negative Peak
Detector 2
Sets the detector to be used by the trace for display purposes only.
Remote
Command
[:SENSe]:SPURious[:RANGe][:LIST]:DETector2[:FUNCtion] OFF | AVERage |
NEGative | NORMal | POSitive | SAMPle | RMS, OFF | AVERage | NEGative |
NORMal | POSitive | SAMPle | RMS, OFF | AVERage | NEGative | NORMal |
POSitive | SAMPle | RMS, OFF | AVERage | NEGative | NORMal | POSitive |
SAMPle | RMS, OFF | AVERage | NEGative | NORMal | POSitive | SAMPle | RMS,
OFF | AVERage | NEGative | NORMal | POSitive | SAMPle | RMS, OFF | AVERage |
NEGative | NORMal | POSitive | SAMPle | RMS, OFF | AVERage | NEGative |
NORMal | POSitive | SAMPle | RMS, OFF | AVERage | NEGative | NORMal |
POSitive | SAMPle | RMS, OFF | AVERage | NEGative | NORMal | POSitive |
SAMPle | RMS, OFF | AVERage | NEGative | NORMal | POSitive | SAMPle | RMS,
OFF | AVERage | NEGative | NORMal | POSitive | SAMPle | RMS, OFF | AVERage |
NEGative | NORMal | POSitive | SAMPle | RMS, OFF | AVERage | NEGative |
NORMal | POSitive | SAMPle | RMS, OFF | AVERage | NEGative | NORMal |
POSitive | SAMPle | RMS, OFF | AVERage | NEGative | NORMal | POSitive |
SAMPle | RMS, OFF | AVERage | NEGative | NORMal | POSitive | SAMPle | RMS,
OFF | AVERage | NEGative | NORMal | POSitive | SAMPle | RMS, OFF | AVERage |
NEGative | NORMal | POSitive | SAMPle | RMS, OFF | AVERage | NEGative |
NORMal | POSitive | SAMPle | RMS
[:SENSe]:SPURious[:RANGe][:LIST]:DETector2[:FUNCtion]?
Example
:SPUR:DET2 AVER, AVER, AVER, AVER, AVER, AVER, AVER, AVER, AVER, AVER, AVER,
AVER, AVER, AVER, AVER, AVER, AVER, AVER, AVER, AVER
1464 Spectrum Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)