7 Save/Recall/Print
7.3 Save
7.3.14.5 Mass Storage Delete (Remote Command Only)
Remote
Command
:MMEMory:DELete <file_name>[,<directory_name>]
<file_name> and <directory_name> must be valid logical paths
Example
:MMEM:DEL "Screen_0000.png"
Notes If no directory is specified, uses the current directory
Removes a file from the specified directory. <file_name> specifies the file name to be removed. This
command generates an “access denied” error if the file is in a restricted folder (for example,
C:\Windows) and you do not have Power User or Administrator privileges
7.3.14.6 Mass Storage Data (Remote Command Only)
Creates a file containing the specified data or queries the data from an existing file.
Remote
Command
:MMEMory:DATA <file_name>, <data>
<file_name> must be a valid logical path
:MMEMory:DATA? <file_name>
Example
:MMEM:DATA? "MyFile.txt"
Notes If no directory is specified, uses the current directory
The command form :MMEMory:DATA <file_name>,<data> loads <data> into the file
<file_name>. <data> is in 488.2 block format. <file_name> is string data
The response to :MMEMory:DATA? <file_name> is the associated <data> in block format
7.3.14.7 Mass Storage Make Directory (Remote Command Only)
Remote
Command
:MMEMory:MDIRectory <directory_name>
<directory_name> must be a valid logical path
Example
:MMEM:MDIR "C:\TEMP\NewDir"
Notes Creates a new directory. <directory_name> specifies the name to be created
Generates an “access denied” error if the new directory would be in a restricted folder (for example,
C:\Windows) and you do not have Power User or Administrator privileges
7.3.14.8 Mass Storage Move (Remote Command Only)
Remote
Command
:MMEMory:MOVE <string>,<string>[,<string>,<string>]
<string> must be valid logical paths
Example
:MMEM:MOVE "C:\TEMP\Screen_0000.png","C:\"
Notes Moves an existing file to a new file or an existing directory to a new directory
2625 Spectrum Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
Need help?
General
