Keysight x-series User Manual

3 Spectrum Analyzer Mode
3.1 Measurement Commands
3.1 Measurement Commands
Commands for selecting each measurement are listed below. Commands relating to
Views and Windows for each measurement are described in the documentation for
that measurement.
Example Having selected SA Mode, you can select the measurement using the following commands:
Swept SA
:CONFigure:SANalyzer
Channel Power
:CONFigure:CHPower
Occupied Bandwidth
:CONFigure:OBWidth
Adjacent Channel Power
:CONFigure:ACPower
CCDF
:CONFigure:PSTatistic
Burst Power
:CONFigure:BPOWer
Spurious Emissions
:CONFigure:SPURious
Spectrum Emissions Mask
:CONFigure:SEMask
TOI
:CONFigure:TOI
Harmonics
:CONFigure:HARMonics
List Sweep
:CONFigure:LIST
Phase and Amplitude vs Time
:CONFigure:PAVTime
Query the currently-selected measurement:
:CONFigure?
Preset
SANalyzer
State Saved Instrument State
Spectrum Analyzer Mode User's &Programmer's Reference 183

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)