2 User Interface
2.5 Cancel key
2.5 Cancel key
This front-panel key has the same functions as the Windows Esc (Escape) key. It
does the following:
–
Cancels dialogs
–
Cancels active functions (unless there is an entry in progress, in which case it
cancels that, and reverts to the previous value)
–
Resets input overloads
–
Aborts print operations
–
Cancels certain other operations (such as alignments)
–
Returns you to Local Control (if in Remote)
–
If the backlight is off, turns on the backlight, and does nothing else
Most of this functionality is the same as earlier X-Series models and similar to ESA
and PSA operation.
When the instrument is in Remote, any hardkey that is pressed on the front panel
displays this message:
Analyzer is in Remote. Press ESC to return to Local
The exception is the Cancel (ESC) key, which takes the instrument out of Remote.
When the instrument is also in the LLO (local lockout state), the Local key is locked
out as well. When this is the case, and the Local key is pressed, this message is
displayed:
Local key is locked out by remote computer. Cancel Local Lockout on computer or
release remote control
When you see this message, you should disconnect the remote computer, or use it
to take the instrument out of the Local Lockout state.
Spectrum Analyzer Mode User's &Programmer's Reference 132
To Next Page
Loading...
Need help?
General
