Keysight x-series User Manual

Table Of Contents
Spectrum Analyzer ModeUser's &Programmer's Reference 1
Table Of Contents 3
1 Documentation Roadmap 80
1.1 Products Covered by this Document 81
1.2 Additional Documentation 82
2 User Interface 86
2.1 Screen Tabs 87
2.1.1 Mode/Meas/View Dialog 88
2.1.1.1 Mode 89
2.1.1.2 Application Mode Remote Commands 92
Application Mode Catalog Query (Remote Command Only) 92
Current Application Model (Remote Command Only) 93
Current Application Revision (Remote Command Only) 93
Current Application Options (Remote Command Only) 94
Application Catalog Number of Entries (Remote Command Only) 94
Application Catalog Model Numbers (Remote Command Only) 94
Application Catalog Revision (Remote Command Only) 95
Application Catalog Options (Remote Command Only) 95
ESA SA compatibility command (Remote Command only) 95
GSM Mode compatibility command (Remote Command only) 96
SA compatibility command for EMC (Remote Command only) 96
Receiver compatibility command for EMC (Remote Command only) 96
APD compatibility command for EMC(Remote Command only) 96
IF Mode compatibility command for EMC (Remote Command only) 97
2.1.1.3 Measurement 97
2.1.1.4 View 97
2.1.1.5 Sequencer 99
2.1.1.6 Screen Name 102
2.1.1.7 Delete This Screen 103
2.1.1.8 Delete All But This Screen 103
2.1.1.9 89600 VSA 104
2.1.2 Add Screen 105
2.2 Meas Bar 107
2.3 Measurement Display 111
X-Series Signal Analyzers
Spectrum Analyzer Mode User's &Programmer's Reference
3

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)