2 User Interface
2.1 Screen Tabs
This results in the analyzer being placed in the EMI Receiver Mode, running the APD
measurement, in order to emulate the ESU APD Mode.
Remote Command
:INSTrument[:SELect] APDistribution
Example
:INST APD
IF Mode compatibility command for EMC (Remote Command only)
Provided for ESU compatibility. When this command is received, the analyzer aliases
it to the following:
:INST:SEL EMI
:CONF MON
This results in the analyzer being placed in the EMI Receiver Mode, running the
Monitor Spectrum measurement, in order to emulate the ESU IF Mode.
Remote Command
:INSTrument[:SELect] IFANalyzer
Example
:INST IFAN
2.1.1.3 Measurement
The Measurement column of the Mode/Meas/View dialog shows all the
Measurements available for the Mode which is selected in the first column. Select a
Measurement in the second column and the View column will show all the Views
available for that measurement. Once you have the Mode, Measurement and View
selected, press OK to change the current Screen to that Mode, Measurement and
View.
2.1.1.4 View
A View is a collection of Result Windows. The View column of the "Mode/Meas/View
Dialog" on page 88 shows all the Views available for the Measurement which is
selected in the second column. Once you have the Mode, Measurement and View
selected, press OK to change the current Screen to that Mode, Measurement and
View.
The View may also be set by using the View tab on the Display menu. The View tab is
the last tab on the Display menu for every measurement. The Views are the same as
those listed in the "Mode/Meas/View Dialog" on page 88.
97 Spectrum Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
Need help?
General
