Keysight x-series User Manual

4 System
4.7 Licensing
N9073EM0E,2018.0831,20-Aug-2018
N9077EM0E,2018.0831,20-Aug-2018
Return a Borrowed License (Remote Command Only)
Remote Command
:SYSTem:LKEY:BORRow:RETurn "<feature>"
Example
:SYST:LKEY:BORR:RET "N9080EM0E"
Dependencies When <feature> is not a valid license or when a license is not borrowed, one of the following errors
is issued:
–
-224,“IllegalParameterValue;License is not installed”
–
-224,“IllegalParameterValue;Unknown license feature”
–
-224,“IllegalParameterValue;License not borrowed”
4.7.4.8 Enabling Network Checkouts While Borrowed
The default for borrowed license use is that you will be explicitly borrowing all
desired network licenses, and that all other available network licenses should be
ignored. This allows you to intentionally limit the functionality available to the
instrument to what is explicitly borrowed.
For example, the RT1/RT2 options that enable the RTSA Mode are automatically
checked out when the instrument is started, because the hardware must be
configured for them at startup time. If you do not intend to use RTSA, then by
borrowing only the licenses you want to use and disabling other network checkouts,
the RT1/RT2 licenses will not be checked out at startup. This leave more RTSA
licenses available for others to use. Note that the instrument must be restarted after
the borrowing has been done to ensure the release of any network licenses already
acquired.
If your intent in borrowing is to ensure access to a particular feature or application,
but you still want to opportunistically use other features or applications, the default
behavior can be changed to enable network license checkouts even when licenses
have been borrowed.
Remote Command
:SYSTem:LKEY:BORRow:NETWork:COUT:ENABle
Example
:SYST:LKEY:BORR:NETW:COUT:ENAB 0
:SYST:LKEY:BORR:NETW:COUT:ENAB?
Dependencies Only visible when licensing is configured to use a network server. SCPI is always available
Preset Unaffected by Preset but set to 0 by Restore Defaults >"Misc" on page 2100 or Restore Defaults >"All"
on page 2101
State Saved Power On Persistent (survives shutdown and restart)
Spectrum Analyzer Mode User's &Programmer's Reference 2184

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)