Keysight x-series User Manual

9 Programming the Instrument
9.4 Status Register System & STATus Subsystem
9.4.6.4 Operation Instrument Register
Monitors instrument-related operations and summarizes them in bit 11 of the
"Operation Register" on page 2787.
Bit Condition Operation
0 Instrument Locked The instrument is locked
Filter Registers
–
"Operation Instrument Condition" on page 2791
–
"Operation Instrument Enable" on page 2792
–
"Operation Instrument Event Query" on page 2792
–
"Operation Instrument Negative Transition" on page 2793
–
"Operation Instrument Positive Transition" on page 2793
Operation Instrument Condition
Returns the decimal value of the sum of the bits in the Status Operation Instrument
Condition register.
NOTE
The data in this register is continuously updated and reflects the current
conditions.
Remote Command
:STATus:OPERation:INSTrument:CONDition?
Example
:STAT:OPER:INST:COND?
Preset 0
Status Bits/OPC depend-
encies
Sequential command
2791 Spectrum Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)