4 System
4.3 Preload / Unload Modes
OFF (the default), adjusting the value with the front panel Up/Down keys or the RPG
hides the Numeric Entry Panel.
Remote
Command
:SYSTem:DISPlay:NEPimmediate ON | OFF | 1 | 0
:SYSTem:DISPlay:NEPimmediate?
Example
:SYST:DISP:NEP OFF
Preset This is unaffected by Preset but is set to ON by Restore Defaults > "User Interface" on page 2099 or
Restore Defaults >"All" on page 2101
State Saved Power On Persistent (survives shutdown and restart)
4.3.7.9 Touch On/Off
Turns the touch functionality on and off on the display. If OFF, you can turn it back
on using the front panel Touch On/Off key, or by using a mouse to toggle this
control.
Preset Always starts up ON
Unaffected by Preset but is turned ON by Restore Defaults > "User Interface" on page 2099 or Restore
Defaults >"All" on page 2101
State Saved Not saved in state, not affected by Preset, not Power On Persistent (does not survive shutdown and
restart)
4.3.7.10 Control Size
Configures the size of the controls in the user interface. This can be used to make
screen dumps from a large screen instrument match those from a smaller screen
instrument, to make the controls more readable on a large-screen instrument, or to
display more information on a smaller screen instrument.
Remote
Command
:DISPlay:UINTerface:CSIZe SMALl | LARGe
:DISPlay:UINTerface:CSIZe?
Example
:DISP:UINT:CSIZ LARG
Preset This is unaffected by Preset but is set to SMALl by Restore Defaults > "User Interface" on page 2099 or
Restore Defaults >"All" on page 2101
State Saved Power On Persistent (survives shutdown and restart)
4.3.7.11 Quick Save Mode
When Quick Save Mode is NORMal (the default setting), the instrument does an
immediate save of a new file of the same type and to the same directory as the
previous Save action. When Quick Save Mode is in the PROMpt state, instead of
immediately performing a Save, the Alpha Keyboard appears with the proposed
Spectrum Analyzer Mode User's &Programmer's Reference 2078
To Next Page
Loading...
Need help?
General
