Keysight x-series User Manual

9 Programming the Instrument
9.4 Status Register System & STATus Subsystem
Uncalibrated Event Query" on page 2831 register when the condition register bit has
a negative transition (1 to 0).
The variable <integer> is the sum of the decimal values of the bits that you want to
enable.
Remote
Command
:STATus:QUEStionable:INTegrity:UNCalibrated:NTRansition <integer>
:STATus:QUEStionable:INTegrity:UNCalibrated:NTRansition?
Example
:STAT:QUES:INT:UNC:NTR 1
Oversweep cleared is reported to the Integrity Summary of the Status Questionable register
Preset 0
Min 0
Max 32767
Status Bits/OPC
dependencies
Sequential command
Questionable Integrity Uncalibrated Positive Transition
Determines which bits in the "Questionable Integrity Uncalibrated Condition" on
page 2830 register will set the corresponding bit in the "Questionable Integrity
Uncalibrated Event Query" on page 2831 register when the condition register bit has
a positive transition (0 to 1).
The variable <integer> is the sum of the decimal values of the bits that you want to
enable.
Remote
Command
:STATus:QUEStionable:INTegrity:UNCalibrated:PTRansition <integer>
:STATus:QUEStionable:INTegrity:UNCalibrated:PTRansition?
Example
:STAT:QUES:INT:UNC:PTR 1
Oversweep set is reported to the Integrity Summary of the Status Questionable register
Preset 32767
Min 0
Max 32767
Status Bits/OPC
dependencies
Sequential command
Spectrum Analyzer Mode User's &Programmer's Reference 2832

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)