Keysight x-series User Manual

3 Spectrum Analyzer Mode
3.7 Burst Power Measurement
DVB-T L/SECAM/NICAM Command Example :RAD:STAN DVBTLSN
IBW 7.61 MHz
Span 24 MHz
RBW 3.9 kHz
VBW Auto rules
Sweep Points 8001
DVB-T G/PAL/NICAM Command Example :RAD:STAN DVBTGPN
IBW 7.61 MHz
Span 24 MHz
RBW 3.9 kHz
VBW Auto rules
Sweep Points 8001
DVB-T I/PAL/NICAM Command Example :RAD:STAN DVBTIPN
IBW 7.61 MHz
Span 24 MHz
RBW 3.9 kHz
VBW Auto rules
Sweep Points 8001
S-DMB System E Command Example :RAD:STAN SDMBSE
IBW 25 MHz
Span 37.5 MHz
RBW 360 kHz
VBW Auto rules
RRC Filter Off
RRC Filter Alpha 0.22
Cellular Radio Standards
The table below lists the CHP settings and provides an example for each cellular
Radio Standard.
GSM/EDGE Command Example :RAD:STAN GSM
3GPP 5G NR Command Example :RAD:STAN NR5GFR1B100M
IBW 100 MHz
Span 150 MHz
RBW Auto rules
VBW Auto rules
1328 Spectrum Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)