Keysight x-series User Manual

3 Spectrum Analyzer Mode
3.9 SEM Measurement
Mode: 5G NR
Remote
Command
[:SENSe]:SEMask:OFFSet[1]|2:INNer:TYPE CTOCenter | CTOEdge | ETOCenter |
ETOEdge | STOCenter | STOEdge | SCTOCenter
[:SENSe]:SEMask:OFFSet[1]|2:INNer:TYPE?
Example
:SEM:OFFS:INN:TYPE ETOC
:SEM:OFFS:INN:TYPE?
Preset
STOCenter
State Saved Saved in instrument state
Range Carrier Center to Meas BW Center | Carrier Center to Meas BW Edge | Carrier Edge to Meas BW Center |
Carrier Edge to Meas BW Edge | Sub-block Edge to Meas BW Center | Sub-block Edge to Meas BW
Edge | Sub-block Center to Meas BW Center
1666 Spectrum Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)