Keysight x-series User Manual

3 Spectrum Analyzer Mode
3.9 SEM Measurement
Swept
SA
CHP OBW ACP CCDF Burst
Power
Spurious
Emission
SEM List
Sweep
802.11ay
W-LAN
HiperLAN/2
(X) X (X)
TETRA (X) X X (X)
DVB-T
L/SECAM/NICA
M
(X) X X (X)
FCC Part 15
Subpart F
(X) X X (X)
DVBT-T
G/PAL/NICAM
(X) X X (X)
DVB-T
I/PAL/NICAM
(X) X (X)
S-DMB System
E
(X) X X X (X)
UWB Indoor (X) X (X)
General Radio Standards
The table below lists the settings and provides an example for each general Radio
Standard.
None Command Example :RAD:STAN NONE
IBW 2 MHz
Span 3 MHz
RBW Auto rules
VBW Auto rules
TETRA Command Example :RAD:STAN TETR
IBW 18 kHz
Span 27 kHz
RBW 1.2 kHz
VBW Auto rules
RRC Filter On
RRC Filter Alpha 0.35
FCC Part15 Subpart F Command Example :RAD:STAN FCC15
Spectrum Analyzer Mode User's &Programmer's Reference 1705

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)