Keysight x-series User Manual

3 Spectrum Analyzer Mode
3.13 Phase and Amplitude vs Time Measurement
TETRA Command Example :RAD:STAN TETR
IBW 18 kHz
Span 27 kHz
RBW 1.2 kHz
VBW Auto rules
RRC Filter On
RRC Filter Alpha 0.35
FCC Part15 Subpart F Command Example :RAD:STAN FCC15
Video Radio Standards
The table below lists the settings and provides an example for each video Radio
Standard.
DVB-T L/SECAM/NICAM Command Example :RAD:STAN DVBTLSN
IBW 7.61 MHz
Span 24 MHz
RBW 3.9 kHz
VBW Auto rules
Sweep Points 8001
DVB-T G/PAL/NICAM Command Example :RAD:STAN DVBTGPN
IBW 7.61 MHz
Span 24 MHz
RBW 3.9 kHz
VBW Auto rules
Sweep Points 8001
DVB-T I/PAL/NICAM Command Example :RAD:STAN DVBTIPN
IBW 7.61 MHz
Span 24 MHz
RBW 3.9 kHz
VBW Auto rules
Sweep Points 8001
S-DMB System E Command Example :RAD:STAN SDMBSE
IBW 25 MHz
Span 37.5 MHz
RBW 360 kHz
VBW Auto rules
RRC Filter Off
RRC Filter Alpha 0.22
2022 Spectrum Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)