Keysight x-series User Manual

3 Spectrum Analyzer Mode
3.13 Phase and Amplitude vs Time Measurement
Cellular Radio Standards
The table below lists the CHP settings and provides an example for each cellular
Radio Standard.
GSM/EDGE Command Example :RAD:STAN GSM
3GPP 5G NR Command Example :RAD:STAN NR5GFR1B100M
IBW 100 MHz
Span 150 MHz
RBW Auto rules
VBW Auto rules
3GPP W-CDMA Command Example :RAD:STAN W3GPP
IBW 5 MHz
Span 7.5 MHz
RBW 240 kHz
VBW Auto rules
RRC Filter Off
RRC Filter Alpha 0.22
3GPP LTE 1.4 MHz Command Example :RAD:STAN LTEB1M4
IBW 1.4 MHz
Span 2.1 MHz
RBW Auto rules
VBW Auto rules
3GPP LTE 3 MHz Command Example :RAD:STAN LTEB3M
IBW 3 MHz
Span 4.5 MHz
RBW Auto rules
VBW Auto rules
3GPP LTE 5 MHz Command Example :RAD:STAN LTEB5M
IBW 5 MHz
Span 7.5 MHz
RBW Auto rules
VBW Auto rules
3GPP LTE 10 MHz Command Example :RAD:STAN LTEB10M
IBW 10 MHz
Span 15 MHz
RBW Auto rules
VBW Auto rules
Spectrum Analyzer Mode User's &Programmer's Reference 2023

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)