5 Preset
Type Of Preset SCPI Command Scope of Preset Front Panel
Access
Defaults" on page
2209
all measurements in the Mode,
affects all parameters in the Mode,
but does not affect Input/Output or
System variables
Does not preset the RF Source.
Dropdown" on
page 2206
"Restore Defaults
All Modes" on
page 2216
:SYSTem:DEFault MODes
Affects all parameters in all Modes,
but does not affect Input/Output or
System variables
Presets the RF Source
"Preset
Dropdown" on
page 2206
"Restore Screen
Defaults" on page
2219
:SYSTem:DEFault SCReen
Deletes all Screens but one, restores
that screen to its default mode and
performs Mode Preset for that mode
Does not affect Input/Output or
System variables
Presets the RF Source
"Preset
Dropdown" on
page 2206
"User Preset" on
page 2212
:SYSTem:PRESet:USER
Local to the current Mode, global to
all measurements in the Mode,
affects all parameters in the Mode, as
well as Input/Output variables
Does not affect System variables
User Preset key
"Preset
Dropdown" on
page 2206
"User Preset All
Modes" on page
2215
:SYSTem:PRESet:USER:ALL
Same as User Preset, but affects all
Modes in the current Screen
"Preset
Dropdown" on
page 2206
"User Preset All
Screens" on page
2217
Affects the entire Screen
Configuration; global to all Modes
and Screens
"Preset
Dropdown" on
page 2206
*RST *RST
Same as Mode Preset. Additionally
always sets Single/Cont to Single
Not available
from front panel
"Input/Output
Preset" on page
2210
:SYSTem:DEFault INPut
Affects all Input/Output variables
Does not preset the RF Source
Input/Output
menu
"Preset
Dropdown" on
page 2206
System > Restore
Defaults
"Full Mode Preset"
on page 2211
:SYSTem:PRESet:FULL
Same as Mode Preset + Restore
Mode Defaults + Input/Output Preset.
Essentially a factory preset of the
current Mode
Presets the RF Source
"Preset
Dropdown" on
page 2206
"Restore User
:SYSTem:DEFault UINTerface
Affects all variables in the ”User System > Restore
2204 Spectrum Analyzer Mode User's &Programmer's Reference