Keysight x-series - Page 2551

7 Save/Recall/Print
7.2 Recall
Mode NFIGURE
Parameter Name Recall Loss Comp
Control Path Recall
Parameter Type ImmediateAction
SCPI Command
:MMEMory:LOAD:LOSS BEFore | AFTer,<file_name>
SCPI Example
:MMEM:LOAD:LOSS BEF,"C:\LossBefore.csv"
:MMEM:LOAD:LOSS AFT,"C:\LossAfter.csv"
Notes Three file formats are supported:
–
Loss Compensation file (.csv)
–
Legacy Loss Compensation file (.loss)
–
S parameter file (.s2p)
Soft Key Label Loss Comp
Backwards Compatibility SCPI :MMEMory:LOAD:LOSS
Initial S/W Revision A.04.00
For .s2p files, only the S21 component is used for the loss compensation.
The CSV format contains the following data:
File Type
Application Name: Measurement Name
Version and Model Number
Loss Comp Data
Below is an example of a valid CSV Loss Compensation file:
[Filetype LossCompensation]
[NF:NFIG]
Ver. ***, Model ***
10, 1.0000
20, 2.0000
30, 3.0000
40, 4.0000
50, 5.0000
60, 6.0000
2551 Spectrum Analyzer Mode User's &Programmer's Reference