Keysight x-series User Manual

7 Save/Recall/Print
7.3 Save
–
Internal Preamp Band
–
Mechanical Atten
–
MechanicalAttenStepEnum
–
PSD Unit
–
Resolution Band Width
–
Resolution Bandwidth Shape
–
RRC Filter Alpha
–
RRC Filter BW
–
RRC Filter State
–
Span
–
Sweep Points
–
Sweep Time
–
Sweep Time Auto
–
TriggerSource
–
Video Bandwidth
–
Y Axis Unit
Following the header entries above is a line containing only MeasResult1 and
MeasResult2, which flags the start of the measurement results. Each subsequent
line consists of two comma-separated values, the MeasResult1 value and the
MeasResult2 value.
–
MeasResult1 contains the same results as :MEAS|:READ|:FETCh:CHPower1
–
MeasResult2 contains the same results as :MEAS|:READ|:FETCh:CHPower2
The exported file is in CSV format. When imported into Microsoft Excel or a similar
spreadsheet application, a typical file appears as follows:
MeasResult
SA:CHP
A.10.53 N9030A
526 ALV ATP B1X B1Y B25 B40 BBA CR3 CRP DCF DDA DP2 DRD EA3 EDP
EMC EP1 ERC ESC ESP EXM FSA LFE LNP MAT MPB NFE NUL P26 PFR PNC
RTL RTS S40 SB1 SEC SM1 TVT YAS YAV
1
Spectrum Analyzer Mode User's &Programmer's Reference 2584

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)