Keysight x-series - Page 414

3 Spectrum Analyzer Mode
3.2 Swept SA Measurement
J-STD-008 Command Example :RAD:STAN JSTD
IBW 1.23 MHz
Span 1.845 MHz
RBW 24 kHz
VBW Auto rules
NADC Command Example :RAD:STAN NADC
IBW 32.8 kHz
Span 49.2 kHz
RBW 1.2 kHz
VBW Auto rules
PDC Command Example :RAD:STAN PDC
IBW 21 kHz
Span 31.5 kHz
RBW 6.2 kHz
VBW Auto rules
IS-97D/98D Command Example :RAD:STAN IS97D
:RAD:STAN IS98D
:RAD:STAN IS95C
:RAD:STAN?
Query always returns IS97D
IBW 1.23 MHz
Span 1.845 MHz
RBW 24kHz
VBW Auto rules
Band Class (IS-97D/98D only)
The following function is only available when you have selected the standard: IS-
97D/98D. It lets you select the band class.
Remote
Command
[:SENSe]:RADio:STANdard:BAND:CLASs BC0 | BC1
[:SENSe]:RADio:STANdard:BAND:CLASs?
Example
:RAD:STAN:BAND:CLAS BC0
:RAD:STAN:BAND:CLAS?
Preset
BC0
State Saved Saved in instrument state
Range 0 (800 MHz Band)|1 (1900 MHz Band)
414 Spectrum Analyzer Mode User's &Programmer's Reference