3 Spectrum Analyzer Mode
3.2 Swept SA Measurement
Wireless W-LAN 802.11a
802.11b
802.11g
802.11n 20 MHz
40 MHz
802.11ac 20 MHz
40 MHz
80 MHz
160 MHz
802.11ax 20 MHz
40 MHz
80 MHz
160 MHz
802.11be 20 MHz
40 MHz
80 MHz
160 MHz
320 MHz
802.11ad
802.11ay 2.16 GHz
4.32 GHz
6.48 GHz
8.64 GHz
HiperLAN/2
Bluetooth DH1
DH3
DH5
UWB Indoor
Each Radio Standard has the preset parameter set for the measurement.
When a standard is selected, the default value of the measurement parameters are
overwritten by those preset values.
When the standard is NONE, or the standard does not specify the firm RBW
requirement, then the table displays “auto”, and the following definition is used to
compute the proper RBW setting:
1.
Compute the guard-band = [Offset Freq A] - 0.5*([Chan Integ BW] + [Ref BW])
2.
Divide by 4.5. Call the result GuardbandGoalRBW
422 Spectrum Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
Need help?
General
