Table Of Contents
4.6.3.1 Source Path Delay Calibration 2129
4.6.3.2 Path Delay Correction On/Off(Remote Command only) 2131
4.6.4 Show Alignment Statistics 2131
4.6.5 Timebase DAC 2143
4.6.5.1 Timebase DAC 2143
4.6.5.2 User Value 2144
4.6.6 Advanced 2145
4.6.6.1 Characterize Preselector 2145
4.6.6.2 Characterize Reference Clock 2147
4.6.6.3 Characterize Noise Floor 2149
4.6.6.4 Calibration Temperature History 2151
4.6.6.5 TDS Alignment 2152
4.6.6.6 Backup or Restore Align Data… 2153
Alignment Data Wizard (without Flash) 2154
Perform Backup (without Flash) (Remote Command Only) 2163
Perform Restore (without Flash) (Remote Command Only) 2163
Alignment Data Wizard (with Flash) 2164
Perform Backup (with Flash) (Remote Command Only) 2169
Perform Restore (With Flash) (Remote Command Only) 2169
Restore Alignment Defaults 2169
4.6.6.7 oGRF Preselector 2170
Align Now, 20 Hz to 30 MHz 2170
Align Now, 30 MHz to 3.6 GHz 2171
Align Now, 20 Hz to 3.6 GHz 2172
Alert 2173
4.6.6.8 Scheduler 2174
Schedule Setup 2174
Task 2174
Date/Time 2175
Hour 2176
Minute 2176
Recurrence 2176
Number of Weeks 2176
Day 2177
4.7 Licensing 2178
4.7.1 License Manager 2178
4.7.2 System Software Version Date 2178
4.7.3 Software Support Expiration Date 2179
4.7.4 Network Licenses 2179
Spectrum Analyzer Mode User's &Programmer's Reference 55
To Next Page
Loading...
