Keysight x-series User Manual

Table Of Contents
10.2.10 Frequency Reference Source 2838
10.2.11 IF Gain 2838
10.2.12 IF Type 2838
10.2.13 Include Power Spectrum 2838
10.2.14 Mechanical Attenuation 2839
10.2.15 Preamp Mode 2839
10.2.16 Resolution Bandwidth Mode 2839
10.2.17 Resolution Bandwidth 2840
10.2.18 Trigger Delay 2840
10.2.19 Trigger Level 2840
10.2.20 Trigger Slope 2840
10.2.21 Trigger Source 2840
10.2.22 Trigger Timeout 2841
10.2.23 Signal Input 2841
10.2.24 Use Preselector 2841
10.2.25 Channel Bandwidth Array 2841
10.2.26 Channel Filter Type Array 2842
10.2.27 Channel Filter Alpha Array 2842
10.2.28 Channel Measurement Function Array 2842
10.2.29 Channel Offset Frequency Array 2843
10.2.30 Channel Occupied Bandwidth Percent Array 2843
10.2.31 Channel x-dB Bandwidth Array 2844
10.3 Define Fast Power Measurement Query (Remote Command Only) 2845
10.4 Configure Fast Power Measurement (Remote Command Only) 2846
10.5 Initiate Fast Power Measurement (Remote Command Only) 2847
10.6 Fetch Fast Power Measurement (Remote Command Only) 2848
10.7 Execute Fast Power Measurement (Remote Command Only) 2849
10.8 Binary Read Fast Power Measurement (Remote Command Only) 2850
10.9 Diagnostic Binary Read Fast Power Measurement (Remote
Command Only) 2851
Spectrum Analyzer Mode User's &Programmer's Reference 79

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)