Keysight x-series User Manual

Table Of Contents
Select Limit 395
Test Trace 395
Frequency Interpolation 396
Freq Reference 397
Amplitude Interpolation 398
Amptd Reference 398
Fixed / Relative Limit (Remote Command Only) 399
Copy from Limit 400
Copy 400
Build from Trace 400
Build 400
Description 401
Comment 401
Test Limits 401
X-Axis Unit 402
Delete All Limits 403
Limit Line Data (Remote Command Only) 403
Merge Limit Line Data (Remote Command Only) 404
Limit Test Current Results (Remote Command Only) 405
Limit Line Fail? (Remote Query Only) 405
Limit Line Control (Remote Commands Only) 405
Limit Line Upper / Lower (Remote Commands Only) 406
Limit Fail? (Remote Query Only) 407
Limit Clear (Remote Command Only) 407
Trace Fail (Remote Query Only) 408
3.2.8.3 Meas Standard 408
Radio Standard Presets 408
Enable Non-Std Meas 423
EMC Standard 424
CISPR Presets 424
3.2.8.4 Legacy Compat (Compatibility) 426
Average/Hold 426
Detector 427
*RST 428
3.2.8.5 Tune & Listen 428
Demod Type 428
Demod Time 429
AM Channel BW 430
FM Channel BW 430
PM Channel BW 431
FM Demod De-emphasis 432
3.2.8.6 Advanced 432
Phase Noise Optimization 432
ADC Dither 438
Swept IF Gain 440
FFT IF Gain 441
Noise Floor Extension 443
10 Spectrum Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)