Keysight x-series User Manual

2 User Interface
2.2 Meas Bar
In the example above, trace 1 is active, visible, and in Average using the Sample
detector, the other traces are inactive, blanked and in Clear/Write using the Normal
detector.
Tapping this panel drops down controls for the Traces.
Spectrum Analyzer Mode User's &Programmer's Reference 110

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)