Keysight x-series User Manual

3 Spectrum Analyzer Mode
3.6 Power Stat CCDF Measurement
Command
[:SENSe]:PSTatistic:BANDwidth?
Example
:PST:BAND 8 MHz
:PST:BAND?
Notes Auto/Man is available only for 5G NR, LTE, LTETDD, LTEAFDD, LTEA TDD
Preset Depends on Mode and installed Options. See "Preset Values" on page 1183 below
State Saved Saved in instrument state
Min 10 kHz
Max Hardware-dependent:
RF Input
–
No Option = 10 MHz
–
WB (25 MHz or wider) = Hardware Option Limit
I/Q Input (for I+jQ)
–
No Option = 20 MHz
–
Option B25 = 50 MHz
Backwards
Compatibility
SCPI
[:SENSe]:PSTatistic:BWIDth
Auto Function
Remote
Command
[:SENSe]:PSTatistic:BANDwidth:AUTO ON | OFF | 1 | 0
[:SENSe]:PSTatistic:BANDwidth:AUTO
Example
:PST:BAND:AUTO 0
:PST:BAND:AUTO?
Preset
ON
Preset Values
Modes Option Preset Values
SA, WCDMA All 5 MHz
CQM All 10 MHz
LTEATDD, LTEAFDD, 5G NR All Automatically calculated
MSR All Same as max value
Spectrum Analyzer Mode User's &Programmer's Reference 1183

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)