Keysight x-series User Manual

4 System
4.6 Alignments
Query Current Temperature at Remote Radio Head
Remote Command
:CALibration:TEMPerature:CURRent:RRHead?
Example
:CAL:TEMP:CURR:RRH?
Notes Value is in degrees Centigrade
Dependencies Only appears when Align RRH Amplitude is available
State Saved No
Query Current Temperature at Remote Radio Head LO
Remote Command
:CALibration:TEMPerature:CURRent:RRHead:LO?
Example
:CAL:TEMP:CURR:RRH:LO?
Notes Value is in degrees Centigrade
Dependencies Only appears when Align RRH LO Power is available
State Saved No
Query Time since Last Align Now All
Remote
Command
:CALibration:TIME:LALL?
Example
:CAL:TIME:LALL?
Notes Value is the elapsed time, in seconds, since the last successful Align Now All or Align Now All but RF
was executed
State Saved No
Query Temperature of Last Align Now All
Remote
Command
:CALibration:TEMPerature:LALL?
Example
:CAL:TEMP:LALL?
Notes Value is in degrees Centigrade at which the last successful Align Now All or Align Now All but RF was
executed
State Saved No
Query Time since Last Align Now Receiver
Remote Command
:CALibration:TIME:INTernal:RECeiver?
Example
:CAL:TIME:INT:REC?
Notes Value in hours since the last successful Align Now Receiver
Dependencies Only appears in VXT models M9410A/11A
State Saved No
2133 Spectrum Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)