Keysight x-series User Manual

6 Input/Output
6.4 Data Source
If you press the Recording tab in the Sweep menu, you will see a certain number of
parameters displayed on the menu panel. Before you save a Recording, these
parameters are all 0, as shown below:
To save the data for the current measurement, press the Save hardkey (or the Save
icon in the File panel) and press the Recording tab on the left side of the Save panel:
2408 Spectrum Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)