Keysight x-series - Page 59

Table Of Contents
Freq/Chan 2247
Power 2248
Waveform 2248
Waveform File 2249
Step Duration 2249
Duration Time 2250
Play Count 2251
Trig Out 2252
Step Configuration (Remote Command Only) 2252
Step Configuration of Step Trigger parameter list (Remote Command Only) 2254
Step Configuration of Transition Time parameter list (Remote Command Only) 2255
Step Configuration of Radio Band parameter list (Remote Command Only) 2255
Step Configuration of Radio Band Link parameter list (Remote Command Only) 2256
Step Configuration of Frequency/Channel Number parameter list (Remote Command
Only) 2257
Step Configuration of Power parameter list (Remote Command Only) 2257
Step Configuration of Waveform parameter list (Remote Command Only) 2258
Step Configuration of Step Duration parameter list (Remote Command Only) 2259
Step Configuration of Duration Time or Play Count parameter list (Remote Command
Only) 2259
Step Configuration of Output Trigger parameter list (Remote Command Only) 2260
Clear List (Remote Command Only) 2260
6.1.8.8 Remote Software Trigger (Remote command Only) 2261
6.1.8.9 Query List Sequence Initiation Armed Status (Remote Query
Only) 2261
6.1.9 Frequency Setup 2261
6.1.9.1 Frequency 2261
6.1.9.2 Channel 2264
6.1.9.3 Radio Setup 2268
Radio Standard/Radio Band 2269
Radio Band Link 2273
6.1.9.4 Set Reference Frequency 2273
6.1.9.5 Freq Reference 2274
6.1.9.6 Freq Offset 2275
6.1.9.7 Freq Increment 2276
6.1.9.8 Rx/Tx Coupling 2277
6.1.9.9 Rx/Tx Offset 2278
6.1.10 Modulation 2278
6.1.11 Modulation Setup 2279
6.1.11.1 AM 2279
6.1.11.2 AM Mod Depth 2279
Spectrum Analyzer Mode User's &Programmer's Reference 59